Split Pistons and Pin Clearance - need help
Hello,
i have ordered pistons from Mike (picture) and do not know which clearance the machine shop have to make.
Is 0,004 inch correct? I read 0,001 / Inch of diameter.
I have oversized pistons (100) = 3,9745 x 0,001 = 0,00397 Inch clearance ???
I also ordered new connecting rods. What clearance ist fine for the piston pins?
I read something about 0,0005 Inch???
Thanks a lot for help.
__________________
Greetings
Michael
------
Toenisvorst, Germany
|