The Ford Barn - View Single Post

100IH · 05-03-2018, 11:56 AM

You say that you want to know if the end contact connector needs to be replaced. Most often, the reason the harness is replaced is that the wires are loosing their insulation and/or have been cut and modified. The end connector usually does not fail and newest reproduction ends are in need of fixing rite out of the box. as has been said, in the end, you may find yourself needing the round contact plate to solve issues with the new harness. There have been several threads on getting the contact plate that is on the newest harnesses to work as well as the old ones.

05-03-2018, 11:56 AM	#10
100IH Senior Member Join Date: Dec 2011 Location: SW Idaho Posts: 970	Re: Light switch connector questions... You say that you want to know if the end contact connector needs to be replaced. Most often, the reason the harness is replaced is that the wires are loosing their insulation and/or have been cut and modified. The end connector usually does not fail and newest reproduction ends are in need of fixing rite out of the box. as has been said, in the end, you may find yourself needing the round contact plate to solve issues with the new harness. There have been several threads on getting the contact plate that is on the newest harnesses to work as well as the old ones.