[1931rumble]

I cleaned the end of the horn rod end with Emory cloth first. Connected the clip of the test light to the battery cable at the started and touched the end of the horn wire and it did not light up. Then I had my helper push the horn button with the test light on the end of the horn wire. It lit up!


Then I cleaned the inside of the light switch where the horn wire contacts the horn in the light switch. Reconnected the light switch. Checked to make sure that the cowl and head lights still worked. Then pushed the horn button. No Sound.


I do not see an easy way to take the light switch apart. I have the Model A books that explained how to remove and clean the horn rod wire and remove the horn button and how to repair and clean the horn itself. I can not find a diagram or explanation of how to check the light/horn switch.



Is there a diagram in one of the books?