The Ford Barn - View Single Post - Engine Rebuild: Leveling/Boring/Seats/Crank

spinelll · 03-10-2015, 01:09 PM

One thing I discovered while I witnessed this work live is that it’s similar to cooking. Ninety-five percent of the process is in the “prep.”

Hey, it looks easy. Just press the button. Well not exactly. There was endless measuring, re-measuring, adjusting, re-adjusting, assessing and re-assessing.

One of the most impressive aspects was the forensic analysis. Based on a subtle nick, scratch, bump, crack, groove or out-of-round condition, the boys explained the cause and effect.

03-10-2015, 01:09 PM	#10
spinelll Senior Member Join Date: May 2010 Location: Northern New Jersey Posts: 337	Re: Engine Rebuild: Leveling/Boring/Seats/Crank One thing I discovered while I witnessed this work live is that it’s similar to cooking. Ninety-five percent of the process is in the “prep.” Hey, it looks easy. Just press the button. Well not exactly. There was endless measuring, re-measuring, adjusting, re-adjusting, assessing and re-assessing. One of the most impressive aspects was the forensic analysis. Based on a subtle nick, scratch, bump, crack, groove or out-of-round condition, the boys explained the cause and effect.