Quote:
Originally Posted by Drive Shaft Dave
Page 339 of the service bulletin 's show's this pump .
|
Yes, that is true but if I recall correctly, it does
not show a print, --or more to the point, an assembly drawing print or even a print for that specific bushing. It has been awhile since I looked at that page in the S/B but I think it actually lists the bushing number. What I was curious about, was if there is an M-Spec listed for that bushing on the print(s) to see exactly what the composition was. Again, I have not thought about this in awhile but I am thinking Ford was beginning to use greaseless bushings in quite a few areas of the car (brake distributors, etc.) and I was just curious as to knowing if the bushing material was the same.