The Ford Barn - View Single Post - Broken stud removal with a new twist! + Engine stand mods! Machining time at Mart's!

21stud · 01-21-2022, 01:25 PM

Mart,

thanks for posting this. I allways enjoy your videos, them are real.

You beat that stud, very good! I allways use TIG, much cleaner and safe. never drilled though, that was new to me. first weld build up then washer and finally nut. and then it is time for coffee. I believe a cup of tea in your part of world?
I feel it is better wait till weld and stud cools before try to remove it. at least this works for me!

01-21-2022, 01:25 PM	#4
21stud Member Join Date: Jun 2015 Location: Finland Posts: 76	Re: Broken stud removal with a new twist! + Engine stand mods! Machining time at Mart Mart, thanks for posting this. I allways enjoy your videos, them are real. You beat that stud, very good! I allways use TIG, much cleaner and safe. never drilled though, that was new to me. first weld build up then washer and finally nut. and then it is time for coffee. I believe a cup of tea in your part of world? I feel it is better wait till weld and stud cools before try to remove it. at least this works for me!