The Ford Barn - View Single Post

Mart · 02-19-2021, 05:01 PM

If you have a bucket of salvaged caps available it is less of a problem than if you don't.
If you don't have any caps I'd say it's a deal breaker.

If the block has been sleeved it probably does rule out going to 3-5/16". I just sleeved two blocks and I'd probably go 60 over, but not .125. Some sleeves have thinner walls than the ones I used so maybe worse.

Mart.

02-19-2021, 05:01 PM	#7
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,747	Re: Missing main caps a big problem? If you have a bucket of salvaged caps available it is less of a problem than if you don't. If you don't have any caps I'd say it's a deal breaker. If the block has been sleeved it probably does rule out going to 3-5/16". I just sleeved two blocks and I'd probably go 60 over, but not .125. Some sleeves have thinner walls than the ones I used so maybe worse. Mart.