Quote:
Originally Posted by Shoebox
As always, big Thank You to all who shared thoughts/opinions on this subject. As I mentioned in my OP, the use of Ross pistons in this engine is an overkill, but going a bit further, their price is not THAT much more than a set of say, Egge. The clearance, isn't that much more, particularly is a torque plate is used for honing, and well, they are such a wonderfully machined piece. But, the Rings, I just want to use something more modern, less friction, better seal, ect. I will call Egge and try to find out what combinations might be available.
|
Shoebox,
I could be wrong, but I do believe all Ross pistons can be ordered with metric ring packs. There may be an uncharge, but I believe they do offer it.
I also wouldn't rule out Arias pistons as well.
Tim