Re: One Or All 4?
Do not conclude the engine needs rebuilding / overhaul until you have evidence that supports it. Valve guides are a source of oil, and it may be that the rings in Cyl 1 have not seated yet. I suggest that you perform a cylinder leak test.
(1)Remove the valve cover;
(2)Rotate the crankshaft so both valves of Cyl 1 are closed;
(3)Put the transmission in gear and chock the wheels;
(4)Pump 75 psig air into Cyl 1, turn the air supply OFF and observe the gauge. A small amount of leak-down past the rings is normal. Check in the valve chamber for air leakage from the valves and guides.
__________________
Bob Bidonde
|