The Ford Barn - View Single Post

Brian · 01-04-2021, 11:19 PM

Are you sure that's a 40 hub? I thought all hubs 36-48 ran a sleeve 68-1236A with the 68-1225A roller bearing, which is smaller in dia than the earlier style B-1225A roller bearing 28-36, which ran directly in the hub. That hub looks like it's had rollers running directly in it as evidenced by the pattern left in the rust.

01-04-2021, 11:19 PM	#4
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,835	Re: 40 ford rear hub sleeves Are you sure that's a 40 hub? I thought all hubs 36-48 ran a sleeve 68-1236A with the 68-1225A roller bearing, which is smaller in dia than the earlier style B-1225A roller bearing 28-36, which ran directly in the hub. That hub looks like it's had rollers running directly in it as evidenced by the pattern left in the rust. __________________ Unfortunately, two half wits don't make a whole wit!