Thread: Spindle Conversion Reversal
View Single Post
Old 02-17-2019, 06:26 PM   #11
Beater
Senior Member
 
Beater's Avatar
 
Join Date: Aug 2015
Location: Southern Alberta
Posts: 582
Default Re: Spindle Conversion Reversal
Quote:
Originally Posted by katy View Post
Alternately, put a good bead w/an arc welder at those 4 spots.
im thinking that would tighten it up tighter, as it cools it will shrink tighter with ark
Beater is offline   Reply With Quote