Quote:
Originally Posted by Terry, NJ
Go to my profile and enter the album"My A". Scan through my pics (they're badly out of order). In there, I show how my spring bent a piece of 3/4 -10 "ready rod" and sent that lil' bugger past my right leg about a zillion MPH. Since that was at disassembly, I had to go through it again to get it back together. Spronnggg! and my homemade spreader provided minimal (none?)resistance to the force of the spring. I had made it of 3/4", sched. 40 water pipe and 3/4-10 threaded rod. I used my backhoe to reassemble and your block of wood with some grease for the knuckle to slide on. It's all there in the pics! Enjoy!
Terry
|
Terry my tool is a lot safer than yours but they both need to be used as anchors . Your lucky to still be with us .