The Ford Barn - View Single Post

markdtn · 03-03-2021, 12:13 PM

If Early Mustang is the right width, then you can use the 8.8 from an '96-01 Explorer cut down the driver side and use 2 RH axles will work. Pretty common lately and they are easy to find. 3.73 and 4.1 are common ratios. 3.55 are rarer. Then you get 4 wheel discs.

03-03-2021, 12:13 PM	#7
markdtn Senior Member Join Date: Jun 2016 Location: Chattanooga, TN Posts: 139	Re: Shoebox Ford rear end swap If Early Mustang is the right width, then you can use the 8.8 from an '96-01 Explorer cut down the driver side and use 2 RH axles will work. Pretty common lately and they are easy to find. 3.73 and 4.1 are common ratios. 3.55 are rarer. Then you get 4 wheel discs.