The Ford Barn - View Single Post

kenparker · 08-22-2020, 08:04 PM

Yes, you still have to cut the Torque tube, Drive shaft and Radias Rods.The length of the Torque Tube is critical to within 1/32 of and inch. If too long or too short will not mate to the trans correctly. Radias Rods are teh same problem If to long or too sshor will n ot fit to be boss on the
Torque Tube.

08-22-2020, 08:04 PM	#15
kenparker Senior Member Join Date: May 2010 Location: Van, Texas Posts: 1,122	Re: What Overdrive Transmission is this? Yes, you still have to cut the Torque tube, Drive shaft and Radias Rods.The length of the Torque Tube is critical to within 1/32 of and inch. If too long or too short will not mate to the trans correctly. Radias Rods are teh same problem If to long or too sshor will n ot fit to be boss on the Torque Tube.