The Ford Barn - View Single Post

Gerald1961 · 12-12-2019, 06:47 AM

I am running my engine since more than 10000 mls with a JBwelded crack similar to yours. Important is to really find the ends of the crack; they ofte are nor really good visible. Clean the surface and widen the glue bed to ca. 1/8 or a bit less by grinding the surface with a dremel or so. Then in can´t go wrong.

Good luck!

12-12-2019, 06:47 AM	#15
Gerald1961 Member Join Date: Dec 2013 Location: Germany Posts: 59	Re: That "Opportunity Knocks" Engine I am running my engine since more than 10000 mls with a JBwelded crack similar to yours. Important is to really find the ends of the crack; they ofte are nor really good visible. Clean the surface and widen the glue bed to ca. 1/8 or a bit less by grinding the surface with a dremel or so. Then in can´t go wrong. Good luck!