Quote:
Originally Posted by vic
Hello my Aussie mate, any chance of a photo or diagram of the one you made? something I would like to have a go at.
Vic.....NZ
|
I bought a LHD one to see what they were like. I then cut it up to make a pattern. It looks the same as the one in the picture in post #1 but doesn't have the hole at the top. I put two ribs across the back to be drilled and tapped to hold a plate for extra instruments or warning lights, like indicators
On my latest installations, I have fabricate one by cutting off the clamp under the tank (won't be used again anyway), clamping it to the steering column and making something to connect it to the rail behind the dash. All then welded together.
Sorry, I've given up trying to upload pictures on this site - it never works.