[GaryU.]

Was cleaning up bags and boxes of old screws/nuts and bolts yesterday and came across some of the original box bolts from my '39. These are the ones that attached the box to the frame. I don't think these are readily available and wanted to post in case someone looking for these has questions about lengths. I didn't include the tapered ends of the middle ones in measurements but did have one of the angled spacer for the kickup area to give a reference for that. The reason the door handle is in the photos is because the shaft is the size needed to serve as a tool to remove these bolts as well as the anti-chatter rod bolts that have the square drive where the rods attach to the frame.