The Ford Barn - View Single Post

woodiewagon46 · 01-09-2020, 10:23 AM

I don't see it mentioned anywhere, but If I'm not mistaken they are ovalhead, not flathead screws. Ovalhead screws are measured from the edge of the part that meets the countersunk frame, not by overall or thread length. So be aware of that when you order them. They are cheap enough, so I would get both and start with the 5/16" and see if they grab and aren't too long.

01-09-2020, 10:23 AM	#7
woodiewagon46 Senior Member Join Date: Jun 2012 Location: Long Island,NY Posts: 1,555	Re: 32 roadster rear window frame I don't see it mentioned anywhere, but If I'm not mistaken they are ovalhead, not flathead screws. Ovalhead screws are measured from the edge of the part that meets the countersunk frame, not by overall or thread length. So be aware of that when you order them. They are cheap enough, so I would get both and start with the 5/16" and see if they grab and aren't too long.