[James Rogers]

Tom, I have sold probably 50-75 setups like this and have only had 2 with problems. One was out of adjustment and would slip when running, I replaced the assembly which was checked on a clutch machine and sold to another who had no problems. The other was a clutch disk that wouldn't fit the input shaft. This disk was replaced with a disk from Sacramento Vintage that fit fine. The original was sold to someone else for use in a stock setup and gave no problem. This is to say that, sometimes it is attributed to other original components that just don't mix well. I think yours is because someone has adjusted the original to make up for wear and will need to be adjusted only. Remember, the adjuster only has to turn about 1 round to move the pedal quite a way.