View Single Post
Old 09-29-2020, 02:36 PM   #20
Dennis Pereira
Senior Member
 
Dennis Pereira's Avatar
 
Join Date: May 2010
Location: Georgetown Divide Kelsey ca
Posts: 868
Default Re: lost interest in 2013, working on it again.

Quote:
Originally Posted by thebanjoman View Post
The pics I have been able to find have been invaluable. I now have the pillar wood in and started with the tacks.

I've found a good air 'palm nailer' that should work with my 80 gallon compressor. I'll not be swinging a hammer if I can help it.

Now that things are starting to come together, Should trimming of the wood be expected or should it fit "As is" with the fasteners?
I doubt it will be plug and play depending on who made your kit . I have photos of a wood kit I installed in a 29 standard coupe in my albums . I tried to upload but no luck if it will help you I can pull the tarps my project its in hibernation and take new pics and try to upload . The search tab at the top of the page will find what you need .
__________________
Dennis in Kelsey ca

Last edited by Dennis Pereira; 09-29-2020 at 02:42 PM.
Dennis Pereira is offline   Reply With Quote