Re: Plugging holes with "Metal To Metal?"
So, I've been working on this project in the back yard and my welder's in the garage. If I want to weld, I have to schlep the frame around front to the driveway. What if I make a dolly? Whipped up a design using old bed frame iron and some wheels left over from my Corvette refurbishment a bunch of years back. The dolly needed a bit of welding so now I can get the frame out to the welder and I buzzed them holes up solid. Now, I'm starting to fill in the rust pock marks with the Metal to Metal.
An unexpected bonus is that I can use a horse under the back of the frame to have it at a nice height to work on or not use the horse and have either end up nice and high to work on the bottom side. (Painting and stuff or welding holes up front)
__________________
Don't never get rid of nuthin!
Last edited by PeteVS; 07-03-2020 at 06:51 AM.
|