View Single Post
Old 07-12-2020, 09:44 PM   #14
Senior Member
flatjack9's Avatar
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 3,908
Default Re: Block drain for 8RT

Originally Posted by russcc View Post
Anyone drilled and tapped the later 8BA type blocks for a block drain. The 59L has one right where it should be, at front low point. The 8RT has none.
I assume you could probably drill out the 8BA at the same point for a drain.
Or will the drain hole in the water pump get most of the water out of an 8RT. ? Thank you Fordbarners.
It is not unusual for that drain hole to get clogged so the water will not drain properly.
flatjack9 is offline   Reply With Quote