Re: Spring Shackle --Grease Hole Up or Down
I think Ol Jenny is asking about the grease passages drilled into the shackle shank.
I didn't really pay attention to mine when i replaced them and they take grease normally.
You might try having someone rock the body back and forth while you try to force the grease in.
It might be a little tricky..
I use a grease gun with a needle tip as I have a variety of grease fittings on my truck...
__________________
Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62
|