The Ford Barn - View Single Post

Krylon32 · 07-07-2021, 10:13 AM

I've got a home made rear spring spreader that my great uncles used in their Ford dealership in the 30's and 40's. It a length of 1 inch ready bolt that slips into some heavy wall tubing with a heavy flat washer welded on 1 end of the tube and the other end smashed flat to a point to wedge in the spring. The ready bolt has a big square nut for adjustment that tightens against the washer with the end of the ready rod also ground flat to fit into the spring. Easy to make of you had access to the materials. I've used it dozens of times over the years in my shop. 30's technology.

07-07-2021, 10:13 AM	#18
Krylon32 Senior Member Join Date: May 2010 Posts: 4,484	Re: KR Wilson spring spreader I've got a home made rear spring spreader that my great uncles used in their Ford dealership in the 30's and 40's. It a length of 1 inch ready bolt that slips into some heavy wall tubing with a heavy flat washer welded on 1 end of the tube and the other end smashed flat to a point to wedge in the spring. The ready bolt has a big square nut for adjustment that tightens against the washer with the end of the ready rod also ground flat to fit into the spring. Easy to make of you had access to the materials. I've used it dozens of times over the years in my shop. 30's technology.