The Ford Barn - View Single Post

fordson · 05-25-2020, 05:02 PM

I got a 25`roll of black fender welt with 3/16" bead (vinyl covered cloth) from All Ford Parts, i believe its the correct welting for 34 Fords.
From all you guys i understand its
1) one piece from for the front from fender to fender (thanks whizzernick for confirming)
2) one seperate piece for each rear fender - total of two pieces
3) one seperate piece from the gas tank cover to body
= 4 pieces! (thanks David)
According to 35fordnt i would have too little - damn!
Well try to fit it that way and cut slits and cutouts accordingly.
Hope that works and is correct !

David:
"It could be that that continuous piece ends at the tops of the fronts of the inner panels and two other long pieces run from that point rearward to the front of the running boards making a total of three pieces of welting for the front fenders and grille".
...that would not show a continous running fender welt!! doesnt that look kind of odd?! It would be interesting to find out if it actually is 3 pieces for the front.
I hope a total of 4 pieces is correct,
thank you!

05-25-2020, 05:02 PM	#9
fordson Senior Member Join Date: Oct 2010 Location: Switzerland/South Africa Posts: 182	Re: HELP with FENDER WELT on 34 Coupe I got a 25`roll of black fender welt with 3/16" bead (vinyl covered cloth) from All Ford Parts, i believe its the correct welting for 34 Fords. From all you guys i understand its 1) one piece from for the front from fender to fender (thanks whizzernick for confirming) 2) one seperate piece for each rear fender - total of two pieces 3) one seperate piece from the gas tank cover to body = 4 pieces! (thanks David) According to 35fordnt i would have too little - damn! Well try to fit it that way and cut slits and cutouts accordingly. Hope that works and is correct ! David: "It could be that that continuous piece ends at the tops of the fronts of the inner panels and two other long pieces run from that point rearward to the front of the running boards making a total of three pieces of welting for the front fenders and grille". ...that would not show a continous running fender welt!! doesnt that look kind of odd?! It would be interesting to find out if it actually is 3 pieces for the front. I hope a total of 4 pieces is correct, thank you!