Thread: Horn Wiring
View Single Post
Old 02-25-2012, 05:02 PM   #9
Tom Wesenberg
Senior Member
Tom Wesenberg's Avatar
Join Date: May 2010
Location: Mpls, MN
Posts: 27,480
Default Re: Horn Wiring

Originally Posted by ctlikon0712 View Post
I had an instance where I disconnected my horn and when I reconnected it, it didn't work. I switched the wires and presto, Ahooga! I think the polarity matters as far a direction the motor spins and the ratchet function that makes the noise..... thoughts?
The motor is series wound, so when you change the field polarity you also change the armature polarity, and the motor still spins the same direction.
Tom Wesenberg is offline   Reply With Quote