Thread: Spark Question
View Single Post
Old 07-06-2020, 12:38 PM   #16
Senior Member
eagle's Avatar
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 1,643
Default Re: Spark Question

Don't start replacing anything until you identify where the problem is. Use a voltmeter on the point arm. Should be battery voltage when open, 0V when closed. This is with the ignition switch ON. Check on it and get back to us.
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."
eagle is offline   Reply With Quote