View Single Post
Old 11-02-2020, 01:38 PM   #7
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 4,751
Default Re: Carburetor Adjustment for 33 Ford

Looks very much like a Holley 94 style???? look to see if it is embossed with a "H, F
, 94 or other numbers and letters. There appears to be an open vacuum port?? Photos with the air cleaner on make it difficult to see much of the Carb. Is it a 2 barrel carb it appears to be since the intake manifold looks much like 1935 or 36 or other 2 barrel intake.
The two brass screws are the idle mixture adjustment. Adjust each at a warm idle for the highest and smoothest idle. each should be about 1 turn out or less.

If there is an open vacuum port make sure it is blocked before and after any adjustment.

Last edited by Terry,OH; 11-02-2020 at 01:52 PM.
Terry,OH is offline   Reply With Quote