The Ford Barn - View Single Post - 1933/34 dual gauge temp sender unit (hose part).

koates · 05-21-2021, 12:57 AM

Graham, my instruction sheet came with a NOS 33-34 genuine FORD gauge in its original colored ford box. Came with a little pull string bag with the hose fittings and 3 spring clips for the temp capillary tube. Yes 3 is correct. The instructions are for the V8 engine or a four cyl Model 40 as shown in the drawing. The gauge is manufactured by the King- Seeley corp as printed on the instruction sheet. I have owned that gauge for about 50 years and bought it new at a Ford parts dealer in Melbourne in the 1960s. I would not ever fit it to a car. I have other used gauges to use. Regards, Kevin..

05-21-2021, 12:57 AM	#39
koates Senior Member Join Date: May 2010 Location: Melbourne Australia. Posts: 2,079	Re: 1933/34 dual gauge temp sender unit (hose part). Graham, my instruction sheet came with a NOS 33-34 genuine FORD gauge in its original colored ford box. Came with a little pull string bag with the hose fittings and 3 spring clips for the temp capillary tube. Yes 3 is correct. The instructions are for the V8 engine or a four cyl Model 40 as shown in the drawing. The gauge is manufactured by the King- Seeley corp as printed on the instruction sheet. I have owned that gauge for about 50 years and bought it new at a Ford parts dealer in Melbourne in the 1960s. I would not ever fit it to a car. I have other used gauges to use. Regards, Kevin..