The Ford Barn - View Single Post

700rpm · 11-14-2013, 01:13 PM

I don't think you can do much with those old repro switches. You can get a new cable and modern switch from Bratton's or Snyder's for about $25. Or Dick Crabtree restores original popouts and can sell you one that's correct for your car. I think they're about $175. Pricey, but they're perfect.

Those old import popouts are notorious for shorting out anyway. I'd just hang it on the wall and get a replacement.

11-14-2013, 01:13 PM	#3
700rpm Senior Member Join Date: May 2010 Location: Portland, Oregon Posts: 5,906	Re: ignition switch issues I don't think you can do much with those old repro switches. You can get a new cable and modern switch from Bratton's or Snyder's for about $25. Or Dick Crabtree restores original popouts and can sell you one that's correct for your car. I think they're about $175. Pricey, but they're perfect. Those old import popouts are notorious for shorting out anyway. I'd just hang it on the wall and get a replacement. __________________ Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole.