Quote:
Originally Posted by nick c
I did mine about 5 yrs ago and still have nightmares. To get the liquid where it will do the most good,It would help if you remove the doors and put them on sore horses, then stand them on edge, hinge down, hinge up. Take time, tap tap.
carry on nick c
|
yup i removed the screws along the top when the doors were on the truck but didnt do anything but soak. Doors are off now and I was planning on soaking and rotating every few days. The rust penetrant stuff works wonders if you give it time. I managed to get all the hinge bolts out with a well fitting screwdriver and wrench after soaking the buts every few days for a few weeks. Once i got past the lock washer doing its job I could spin the nut with my fingers. Only had to drill one screw head off due to previous attempt by someone else stripping it out.