Quote:
Originally Posted by Synchro909
The shift knob is mounted on the gear stick and is pulled straight up for O/D, down for O/D off. Throw is about 2"
|
Not doubting you, but I would have thought it be the opposite since you push the shift lever forward for O/D thus it pushes the O/D shift rod in. Down on the cable would push, not pull? Or does it work on a bell crank type setup. Inquiring minds.
Quote:
Originally Posted by duke36
Not sure how to put the cable in a "neutral" position, just in is for OD and out is for stock gearing ?
|
You should be able to feel the neutral detent between low and high? There are three distinct positions with the shift lever. Again inquiring minds. I have the shifter but would like more info on the cable shifter.
Quote:
Originally Posted by Pdgx
Ya, buts that’s a pretty crude pic. Would like to see how it fits in the vehicle and how much cable throw is needed before ordering.
|
Well perhaps next time I won't bother then.