[flatheadfan]

Keith-

I have a '35 with an oiler. Locating the oiler had a self-imposed problem. I did not want to drill any holes in the firewall or the frame. To get around this I used the two bolts that hold my radio. I made a metal horizontal strip that reached from one radio bolt to the other. Next, I made two metal strips attached to the horizontal strip that were bent downard following the profile of the firewall. On the ends of these strips I made another horizontal strip where I mounted the oiler. On the backside of this strip I used some self-sticking high density rubber. As you can see in the picture I also use this same bracket to mount my voltage regulator. No problems with this insulation and it has been on there for several years.

Tom