The Ford Barn - View Single Post

Terry,OH · 03-13-2020, 07:51 AM

The 36 seat back elevates, the 35 does not. There could also be a difference in the final back rest height. This information is covered on page 66 of the 35-36 restoration book, along with dimensions.

The side plywood is assembled and then upholstered with tacks going through the side sheet metal and into the plywood. If you have not replaced the side sheet metal you should be able to see the small tack holes.

03-13-2020, 07:51 AM	#2
Terry,OH Senior Member Join Date: May 2010 Posts: 4,751	Re: 1935 coupe seat The 36 seat back elevates, the 35 does not. There could also be a difference in the final back rest height. This information is covered on page 66 of the 35-36 restoration book, along with dimensions. The side plywood is assembled and then upholstered with tacks going through the side sheet metal and into the plywood. If you have not replaced the side sheet metal you should be able to see the small tack holes. Last edited by Terry,OH; 03-13-2020 at 08:01 AM.