View Single Post
Old 05-17-2021, 06:39 AM   #11
Pilotdave
Senior Member
 
Pilotdave's Avatar
 
Join Date: Oct 2010
Location: Grafton, MA
Posts: 1,226
Default Re: LED Tail Lights - Adding Resistors

Thanks very much for all the suggestions. The car is 6v, + ground. The front flashers are the amber lights that mount between the bumper bars. I'll check their wattage and/or see if there's a higher wattage version of the bulb for them.

The 6.5 ohm resistors installed in parallel is intended to lower the resistance of the circuit, thereby increasing the current flow enough to make the flasher unit happy. Thus far the results are defying Ohm's Law!
Pilotdave is offline   Reply With Quote