The Ford Barn - View Single Post - How are 28-29 and 30-31 radiators different?

Steve Plucker · 08-29-2020, 12:02 PM

Don,

Ok...now that we have that settled...

Where are your measurements when the radiator is stright up and down and not tilted forward?

Could that be the reason for your 1-1/2 inch distance?

If squared up...it should move the radiator towards the shaft.

It also looks like the radiator is not sitting fully on the front crossmember...I am not familiar with the 30-31 set up.

Pluck

08-29-2020, 12:02 PM	#7
Steve Plucker BANNED Join Date: May 2010 Location: Walla Walla, Washington USA Posts: 6,066	Re: How are 28-29 and 30-31 radiators different? Don, Ok...now that we have that settled... Where are your measurements when the radiator is stright up and down and not tilted forward? Could that be the reason for your 1-1/2 inch distance? If squared up...it should move the radiator towards the shaft. It also looks like the radiator is not sitting fully on the front crossmember...I am not familiar with the 30-31 set up. Pluck Last edited by Steve Plucker; 08-29-2020 at 12:09 PM.