Quote:
Originally Posted by Bored&Stroked
Info: Cometic does make 21-Stud gaskets . . . is varying thicknesses. Here is a link to Jegs for a .040 gasket. One thing to note, MLS gaskets usually require a very fine RA surface finish - or they might leak. Check with the manufacturer before you have your decks trued up and decked.
https://www.jegs.com/i/Cometic-Gaske...0-040/10002/-1
|
Thanks for that. I'll call Cometic. The only gasket I can find on their site for a 221 is a drain plug gasket.
I'm looking through my junk for a used std bore piston, I'll assemble a used rod and piston into the block and see what that shows me for deck height. Like you say, it could well be different than theoretical.