Thread: Rusty Coolant
View Single Post
Old 10-12-2020, 05:28 PM   #14
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
Default Re: Rusty Coolant

Plain demineralized water will absorb heat more but that leads to the lower boiling point as well. Ethylene glycol mix will boil at a higher temperature than water. This makes the cooling capability moot on an engine that runs on the verge of overtemp due to air leaks, thin cylinder walls, and the possibility of a fair amount of crud build up in the tubes of the radiator.

Run water if you want but there is no advantage to it and you have to drain it anytime it freezes.
rotorwrench is offline   Reply With Quote