Thread: CCPU interior.
View Single Post
Old 01-28-2020, 07:58 PM   #7
whirnot
Senior Member
 
whirnot's Avatar
 
Join Date: Mar 2013
Location: Bend Or.
Posts: 1,053
Default Re: CCPU interior.

Quote:
Originally Posted by rotorwrench View Post
I've installed a lot of different materials on surfaces that have no place for trim screws or clips. A person has to use contact cement. Trimmers do it all the time whether attaching vinyl, carpet, or what have you. The modern foam backed fabric will work too but the foam doesn't last all that well.

If you attach it to wood, you can use various wood screws with or without trim washers. It's going to be a custom install so do it however you want it.
Yep, contact cement. That was the answer I was looking for. Spray adhesive doesn't works very well, but contact cement does. Not too forgiving.
__________________
Bill Worden

1929 Roadster
1929 Briggs Town Sedan
1930 Closed Cab pickup
Smith Motor Compressor
1951 Ford F1

High Desert Model A's
whirnot is offline   Reply With Quote