The Ford Barn - View Single Post

Sid · 09-10-2017, 10:52 AM

You may consider the top loader 3 speed + o/d trans. I believe Merc. 3'rd members thru 54 are a direct fit. 55-56 Ford should fit but you may need to swap spider gears or axles as they may be 28 spline. 3.55 gear ratio is a good middle of the road. With a 28" tall tire at 65 would put you close to 2750 rpm.

09-10-2017, 10:52 AM	#4
Sid Senior Member Join Date: May 2010 Location: Rathdrum Idaho Posts: 737	Re: 1950 Ford rear end You may consider the top loader 3 speed + o/d trans. I believe Merc. 3'rd members thru 54 are a direct fit. 55-56 Ford should fit but you may need to swap spider gears or axles as they may be 28 spline. 3.55 gear ratio is a good middle of the road. With a 28" tall tire at 65 would put you close to 2750 rpm.