The Ford Barn - View Single Post - 32 ford f-1 type cpp power steering

RB · 08-31-2021, 11:24 PM

Currently replacing my 32 roundy/round steering box with an unmodified F-1, have it clamped in place using a f-100 wedge to align it with respect to converting from a ladder frame mount to the 32 angle frame while keeping in mind headers, clutch, brake, seating position etc. I know the traditional method is to cut/& machine the flange & must admit was a bit surprised with the unavailability of a F-1 wedge. Since the frame rail had seen several box changes for whatever reason through the years maintaining the the original mounting holes were of little concern. As mentioned early on I had most recently come across the CPP ad for the power steering box of which has been designed closely to the configuration of the manual box & felt it might be of at least passing interest.

08-31-2021, 11:24 PM	#12
RB Senior Member Join Date: May 2010 Location: papillion nebraska Posts: 406	Re: 32 ford f-1 type cpp power steering Currently replacing my 32 roundy/round steering box with an unmodified F-1, have it clamped in place using a f-100 wedge to align it with respect to converting from a ladder frame mount to the 32 angle frame while keeping in mind headers, clutch, brake, seating position etc. I know the traditional method is to cut/& machine the flange & must admit was a bit surprised with the unavailability of a F-1 wedge. Since the frame rail had seen several box changes for whatever reason through the years maintaining the the original mounting holes were of little concern. As mentioned early on I had most recently come across the CPP ad for the power steering box of which has been designed closely to the configuration of the manual box & felt it might be of at least passing interest.