The Ford Barn - View Single Post - Roadster Rear Window and Body Socket Hole Size

Dan Ewing · 12-30-2011, 01:59 PM

Thanks Marco and Hoarsewhisperer.

That does confirm I have the correct glass frame albeit a bit too thick glass. I'll try to locate the 1/8" laminate for authenticity but may settle for the LeBaron Bonney or equivalent. There are a few good glass companies who furnish quality Model A glass and I'll check there also.

I'll go with the 5-40 by 3/8" oval head machine screws, nickle plated.

Thanks for the info on the body socket as well.

Dan

12-30-2011, 01:59 PM	#4
Dan Ewing Member Join Date: May 2010 Location: Richmond, TX Posts: 35	Re: Roadster Rear Window and Body Socket Hole Size Thanks Marco and Hoarsewhisperer. That does confirm I have the correct glass frame albeit a bit too thick glass. I'll try to locate the 1/8" laminate for authenticity but may settle for the LeBaron Bonney or equivalent. There are a few good glass companies who furnish quality Model A glass and I'll check there also. I'll go with the 5-40 by 3/8" oval head machine screws, nickle plated. Thanks for the info on the body socket as well. Dan