The Ford Barn - View Single Post

chrs1961815 · 08-24-2021, 08:07 PM

When you tighten the set screw, be sure the housing is seated flatly against the head and not cocked. I have seen that happen before and it causes a knock. Tighten the screw down and then the nut to jam it of course.

Heat shield is not needed these days with the good condensers from A&L that hsve modern technology. Heat doesn't affect these new ones like the old ones 30 or 40 years ago.

08-24-2021, 08:07 PM	#4
chrs1961815 Senior Member Join Date: Jul 2018 Location: Spring Grove, Illinois Posts: 1,371	Re: Heat Shield Removal When you tighten the set screw, be sure the housing is seated flatly against the head and not cocked. I have seen that happen before and it causes a knock. Tighten the screw down and then the nut to jam it of course. Heat shield is not needed these days with the good condensers from A&L that hsve modern technology. Heat doesn't affect these new ones like the old ones 30 or 40 years ago. __________________ "The more things change, the more they stay the same."