The Ford Barn - View Single Post

160B · 12-18-2016, 06:00 PM

FWIW

Remove the welsh plug and you can remove the shaft that the gear runs on and remove the gear. Repeat the process with the second drive unit. Reassemble the good case and gear.

You may have to drill a small hole in the welsh plug to remove it. You should be able to get a replacement welsh plug from your local friendly NAPA parts dealer. If not solder the hole and reinstall.

12-18-2016, 06:00 PM	#2
160B Senior Member Join Date: Aug 2010 Location: Port Orchard, WA Posts: 1,498	Re: 1930 speedo gear case question FWIW Remove the welsh plug and you can remove the shaft that the gear runs on and remove the gear. Repeat the process with the second drive unit. Reassemble the good case and gear. You may have to drill a small hole in the welsh plug to remove it. You should be able to get a replacement welsh plug from your local friendly NAPA parts dealer. If not solder the hole and reinstall. __________________ 1931 160B & 1931 68B If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time? Last edited by 160B; 12-18-2016 at 06:05 PM.