The Ford Barn - View Single Post

Brian · 01-01-2021, 11:19 PM

I'd NOT use the spacer; you set the preload through tightening up the two nuts with interposed tab washer. Agree with what Lawrie says above

01-01-2021, 11:19 PM	#4
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,834	Re: New pinion bearings I'd NOT use the spacer; you set the preload through tightening up the two nuts with interposed tab washer. Agree with what Lawrie says above __________________ Unfortunately, two half wits don't make a whole wit!