[rockfla]

Okay, so I took the lead off the cutout and still had the arcing, SO got to poking around and two things, one.....the switch for the interior light looks like a suspect point as well as number two.....at the time of pick up I was made aware (and I forgot about it) that the wire for the siren wasn’t hooked up SO possibly “The” issue, I gotta chase that wire!!!!! In the mean time, I got it running and let dad take it for a spin, little did I know he was thinking trip and he ran it out of gas so I had to go fetch him and the car home BUT on the drive he reported the ammeter was “pegged”??? So thinking I need to pull the cutout??? Am going to wire in a go/no go light and start with the interior light switch, then the siren, then the horn, then the brake light switch!!!! Any thoughts/advice still welcome and appreciated