08-07-2020, 07:12 PM
|
#18
|
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Electrical Issue advice
Quote:
Originally Posted by koates
rockfla, just another tip regarding the round ford cut out. There are two terminal screws and black insulators on the cutout. Pay very close attention how the insulators are fitted on the cutout cover. Each insulator is round in section with a square portion and is also curved (concave) which fits into a square hole on the metal cut out cover and this has to be fitted in exactly otherwise the terminal screw or bolt will short out to ground on the cover. Reproductions of these special insulators are available. This could also be your problem and the cut out itself is OK. Regards, Kevin.
|
Good point!
|
|
|