Quote:
Originally Posted by Bob Bidonde
I caution you that the RH tail light brackets are not the opposite geometry of the original LH bracket, so do not transfer any location measurements from the LH side. Instead position the RH tail light with its bracket so it is visually of the same height and distance from the body as the LH light.
|
I measured twice and still the rh light didn't look right, it was close so I stepped back and adjusted the rh light to look right. I used a level and a long straight edge and taped the light to the fender moving it until it looked right.
Thank you Bob ! I thought it was just me being off.