Re: 59 Camshaft oiling
Quote:
Originally Posted by Old-Ford-Iron
I couldn't find a C indicating Canadian. Good thought though.
Ronnie I did see your response and thanks.
I sent the single relieved/slotted one in today. And yes it passed factory cam bearing tolerance. I think the single slotted cam will run more psi. and volume of oil elsewhere in the engine anyways. Last bearing i'll be worrying about is the rear cam.
Thanks for good feedback gents
|
Good choice you will be happy with the results.
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
|