Re: Firewall Insulator
I installed the Firewall Insulator from Quiet Ride Solutions this weekend. I had it sent to me by Berts who had noted they were waiting for this part for some time. One word of caution is that the holes don't line up well. They are close but not close enough. Make sure you dry fit it a couple of times before using any adhesive. The holes for the coil mounting bolts need to be drilled out to be about 3/8" diameter. If these are made bigger the other holes roughly line up, however, the lower holes to mount the junction box are way off. They can be drilled out from the engine side. Otherwise it went in fairly easily and looks great!
|